heavy-duty 1.2mm 304 stainless steel with adjustable feet Target Top • 3 piece heavy-duty cast iron top with fully machined surface • Top plates and removable centre with integral spill protection design • Cast top reinforced with integral heat fins for heat zone definition • 45MJ dual ring cast iron burner with single control • Full pilot and flame failure protection • 50mm thick refractory brick lined burner box for high heat retention • 2 vitreous enamelled spill trays • Supplied with heavy-d
heavy-duty 1.2mm 304 stainless steel with adjustable feet Griddle • 20mm thick machined top plates standard • Optional ribbed plate sections • Optional mirror finish hard chrome plates • 2.5mm thick 304 stainless steel splash guards sides and rear • 2.0mm thick grease channel • Dual thermostatic control zones • Welded hob surround with 1.5mm 304 stainless steel bull nose • Splashback and side panels 1.2mm 304 stainless steel • Front panels 0.9mm 304 stainless steel • Stainless steel g
Technical data sheet for GAS GRIDDLE 600mm GP8600G-B, GP8600G-CB, GP8600G-LS I Waldorf, 800 SERIES I Heavy-duty thermostatic gas griddle > 20mm thick griddle plate > Ribbed plate options > Chromed mirror plate options > Top weld sealed plates > 53MJ thermostatic burner system > 3 models of base unit I Stainless steel exterior > Easy clean I Easy service > Fully modular GP8600G-LS Overall Construction Griddle • 20mm thick machined top plates standard • Optional ribbed plate se
heavy-duty 1.2mm 304 stainless steel bench legs with adjustable feet. • Adjustable height 80mm - 105mm Cabinet base (supplied as -CB model) • Fully modular for match suite finish • Double skin 0.9mm 304 stainless steel interior and exterior • Optional GN 1/1 4 position racking kit • 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with adjustable feet Leg stand (supplied as -LS model) • Fully modular for matched suite finish • Framed top for connection to Griddle • 63mm dia. heavy-du
heavy-duty 1.2mm 304 stainless steel bench legs with adjustable feet. • Adjustable height 80mm - 105mm Cabinet base (supplied as -CB model) • Fully modular for match suite finish • Double skin 0.9mm 304 stainless steel interior and exterior • Optional GN 1/1 4 position racking kit • 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with adjustable feet Leg stand (supplied as -LS model) • Fully modular for matched suite finish • Framed top for connection to Griddle • 63mm dia. heavy-du
heavy-duty 1.2mm 304 stainless steel bench legs with adjustable feet. • Adjustable height 80mm - 105mm Cabinet base (supplied as -CB model) • Fully modular for match suite finish • Double skin 0.9mm 304 stainless steel interior and exterior • Optional GN 1/1 4 position racking kit • 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with adjustable feet Leg stand (supplied as -LS model) • Fully modular for matched suite finish • Framed top for connection to Griddle • 63mm dia. heavy-du
heavy-duty 1.2mm 304 stainless steel legs with adjustable feet • Condensing unit removable through front of unit for service • Easy clean interior Controls Griddle • Separate left, centre, and right side heat zones • Three 90-300°C thermostats • Large easy use control knobs - heat resistant reinforced • Easy view control settings on knobs • Flame failure pilot burners • Piezo ignition to each pilot burner Refrigerated Base • Digital control electronic thermostat • Automatic defrost • Automatic e
660mm legs with adjustable feet. Ceramic tile hearth. OVEN 73 MJ/hr oven burners. 180 watt fan motor. Vitreous porcelain enamel oven liner. Five, heavy duty, chrome wire oven racks with ten rack positions. Easy access interlocking double door mechanism. Doors open 180° for full oven access. Fully insulated, double glazed, toughened glass window doors. Heat resistant oven door handle. Microswitch operated fan cut out when oven door is opened. CONTROLS Ergonomic controls. One hour bak
Ensure that power to the proofer / holding cabinet is switched ‘On’. 1. Set the Function Control (2) to ‘HOLD’. The ‘Power On’ Indicator light (1) will illuminate when the Function Control (2) is in the ‘HOLD’ position. 2. Set the Thermostat Control (4) to the desired Holding Temperature. (65-85°C / 150-185°F). The Heating ‘On’ Indicator light (3) will turn ’Off’ when the cabinet has reached the set temperature. 3. Humidity Control (6). The humidity control function is not used in the ‘HOLD’ Mod
reserves the right to change the specifications and design without prior notice. © Copyright Moffat Ltd. June 2010. Contents List P8M / P12M Turbofan Proofer / Holding Cabinets. Model Numbers Covered in this Manual P8M - Turbofan Proofer / Holding Cabinet - 8 Tray. P12M - Turbofan Proofer / Holding Cabinet - 12 Tray. Introduction........................................................................................................... 2 Safety Information Specifications..........................