3 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .............................................. 3 WARNING ........................................................... 3 FEATURES .......................................................... 4 SUPPLIED ACCESSORIES ............................... 4 VIDEO CASSETTE ............................................. 5 OPERATING CONTROLS AND FUNCTIONS.. 6 PREPARATION FOR USE ................................. 8 CABLE CONNECTIONS .................................
Replace the battery cover. 3 30 30 5m OO Notes: • Do not recharge batteries that are not intended to be recharged. • Use only the size and type of batteries specified. Do not mix different types of batteries together or old batteries with fresh ones. • When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries. • Do not throw the batteries into a fire. Recycle used batteries in the specified manner. • Do not drop, dampen or disasse
Non-signal power-off in 10 minutes If the unit doesn’t receive a signal state, the TV will enter standby mode automatically in 10 minutes. To turn it on, press the POWER button on the remote control. Note: Under AV mode, this function only activates when you set BLUE BACKGROUND. Change channels You can change channels by using the PROG. / button on the front of the TV (or the PROG. / button on the remote control). When ANTENNA is set as AIR, you can also access the channel by using a 2-digit num
Telephone: (02) 9313 7111 Facsimile: (02) 9313 7555 Internet: www.palsonic.com.au
Australian Telephone: (02) 9313 7111 Facsimile: (02) 9313 7555 Internet: www.palsonic.com.au
Australian Telephone: (02) 9313 7111 Facsimile: (02) 9313 7555 Internet: www.palsonic.com.au
Press the button to select the desired item. Press the MENU button to return to the previous menu. PAL Tuner/Channel Image Audio Timer Setup Britain Belgium France Australia Country Select Czech Denmark Auto Scan Press the button to select the Auto Scan and press the ENTER button to start auto scan. The screen will display shown below: CH No 8 FREQ 154.20 MHz Auto scan Auto scan will take a few minutes, when the tuning operation completes the unit will exit and memorise the programs by sequence
In the menu, press the ▲ T button to select the desired item, press the ENTER button to confirm, press the MENU button to return to the previous menu. Note: This item is only available when there is VGA signal input. Audio Setting Press the MENU button to enter the setup menu, then press the ▲ ▼ button to select Audio, press the ENTER button to confirm and enter the menu shown on the right. In the audio setup menu, press the AT button to select the desired items, press the ENTER button to en
Australian Telephone: (02) 9313 7111 Facsimile: (02) 9313 7555 Internet: www.palsonic.com.au
Each digit should be entered at 3 seconds time interval. Instruction Manual 12 TROUBLESHOOTING GUIDE Check the following guide for a possible correction to a problem before contacting customer support. Symptoms Correction No power .. Connect the power plug into the wall outlet securely. Dark, Poor or No picture .. Verify the connection from the VCR video output to the TV video input is secure.Then switch TV to the appropriate Video mode by pressing TV/VIDEO button. .. Adjust picture setting for