Log: They are field adjustable for vertical or horizontal polarization with matched principal plane beamwidths for optimum performance in either orientation. This design also provides improved front-to-back ratio and sidelobe suppression that reduces interference. All models feature a robust mounting structure for consistent performance regardless of weather conditions. • Field adjustable to allow vertical or horizontal polarity. Eliminates co-channel interference from neighboring radiators. Polarit
Its broad elevation plane radiation pattern has been shaped to direct energy where it is needed, while suppressing the misdirected upper and lower sidelobe energy. The result is excellent coverage for a variety of in-building applications. • Optimized radiation pattern focuses energy where it is needed while suppressing upper and lower sidelobe energy, • UL Plenum rated RG58 coax cable and UL94-V0 radome meet the strictest safety specifications. • Includes a 1/4-20 insert that allows for easy
1 4 7 8 9 6 32 5 @SHO Syntax: Sets a specific "’@SHO’,
......... 9 Overview 9 Technical Support ................................ ................................ 11 Overview 11 TXC-ACT Advanced Classroom Transmitter Table of Contents Table of Contents TXC-ACT Advanced Classroom Transmitter Introduction Overview The AMX Synergy TXC-ACT Advanced Classroom Transmitter (Figure 1) offers a full range of control options for AMX Synergy systems. Figure 1 Front view of the TXC-ACT You can control all the equipment in your media head end . VCRs, laserdisc pl
1). Key features include: • Plays DVDs (and audio CDs) from its internal DVD/CD player • Plays audio and video content over a CAT5 network interface from a MAX-HT server. • Provides A/V output in multiple formats: Component Video, Composite Video, SVideo and HDMI™ (High-Definition Multimedia Interface). • Provides both analog stereo and coaxial digital audio outputs. The supported digital audio outputs are Dolby® Digital (S/PDIF), Dolby® Digital-Plus (Surround 5.1, 7.1), and DTS® Surround. • A R
Write down the replacement date on a sticker or label by adding 5 years to the date of installation. Then attach it to the bottom of the AXB-MIDI. FIG. 6 Lithium battery and socket All control commands in AXB-MIDI memory are lost when the lithium battery is replaced. Contact your AMX dealer before you replace the lithium battery and verify that they have a current copy of the Axcess program for your AXB-MIDI. This will avoid any inadvertent loss of data or a service outage. AXB-MIDI MIDI Interfa
If you later change the device number, remove and reconnect the AXlink connector. This enters the new device number into memory. The device number takes effect only on power-up. The device can be 1 of the 255 devices in an Axcess, AXCENT, AXCENT2, or AXCENT3 system. The device number must match the device assignment in the Axcess program. AMX assigns device numbers into the following three segments: ! Cards 1 through 95 ! Boxes 96 through 127 ! Panels 128 through 255 Set the device number by set
The red TV Sensor indicator, located on the front panel, should be dark. 3. Turn the television on. 4. Turn the POT screw counterclockwise until the TV Sensor indicator lights. Then, turn the POT screw counterclockwise one full turn. 5. Turn television power off. If the TV Sensor indicator is lit, turn the POT screw clockwise until the indicator goes dark. 6. Reattach the enclosure and refasten the two screws. IR Signal Attenuation Adjustment If you experience television control problems after c
8 PCS and Axlink data and power connections .................................................................. 9 PCS and 12 VDC power supply connections ................................................................... 9 Installation .............................................................................................................. 10 Television Power Sensor Adjustment...................................................................... 11 IR Signal Attenuation Adjustment..........
Enclosure Metal with black matte finish Dimensions (HWD) 1.51" x 5.55" x 5.45" (3.84 cm x 14.10 cm x 13.84 cm) Weight 1.1 lb (0.499 kg) AXlink Power 12 VDC @ 230 mA AXB-VOL3 Three-Channel Volume Control Installation Installation DIP Switch Settings Use the device DIP switch to set the AXB-VOL3 AXlink device number. You can set it as one of 255 devices in an Axcess control system. Set the device number with the total of all ON (down) switches. As an example, the DIP switch below defines Device 12
