Buyers shall prepay transportation charges for equipment returned to Anritsu for warranty repairs. Obligation islimited to the original purchaser. Anritsu is not liable for consequential damages. LIMITATION OF WARRANTY The foregoing warranty does not apply to defects resulting from improper or inadequate maintenance by the User, unauthorized modification or misuse, or operation outside of the specifications of the product. No other warranty isexpressed or implied, and the remedies provided herei

Anritsu’s obligation covers repairing or replacing products which prove to be defective during the warranty period. Buyers shall prepay transportation charges for equipment returned to Anritsu for warranty repairs. Obligation is limited to the original purchaser. Anritsu is not liable for consequential damages. LIMITATION OF WARRANTY The foregoing warranty does not apply to Anritsu connectors that have failed due to normal wear. Also, the warranty does not apply to defects resulting from imprope

• To ensure that the equipment is used safely, read the "For Safety" in the MG3681A Digital Modulation Signal Generator Operation Manual first. • Keep this manual with the equipment. ANRITSU CORPORATION Document No.: M-W1955AE-4.0 MU368060A AWGN Unit Operation Manual MU368060A AWGN Unit Operation Manual Copyright © 2001-2003, ANRITSU CORPORATION. All rights reserved. No part of this manual may be reproduced without the prior written permission of the publisher. The contents of this manual may be

STM-64 and OC-192 are widely deployed in today’s networks. While great care is devoted to warrant a very high quality of transport, in the real world of day- to-day installation, commissioning and maintenance activities things are not always running smooth. To this effect, several important tests are always carried out in order to assess the good behaviour of these networks before turn-up. Similarly, when the network has been turned on, it is paramount to keep monitoring the network health at ph

STOP Description: Stops the measurement mode and puts the sensor in idle mode. Syntax: STOP + LF Return Value: OK or ERR Remarks: This command should be sent before exiting the user application. IDN? Description: Gets identification information from the sensor. Syntax: IDN? + LF Return Value: ANRITSU, Model #, Serial #, Module Serial #, firmware version PWR? Description: Gets the power reading from the power sensor. Syntax: PWR? + LF Return Value: Power value in dBm Remarks: If an error conditio

Autoscale automatically scales the measurement results. • Max/Min: Type in maximum and minimum display value. Use Rescale after changing values. • Rescale: Rescales the measurement results. Markers Screen Options (left): • Markers slider: Moves marker between data points. • Gain: Gain is in dB and is the Gain, measured at the CW frequency for each power level in the power sweep. (Could also be called Gaini compression measurement.) The displayed power in the power of 1 input tone. • Phase: Phase

ANRITSU CORPORATION Document No.: M-W1137AE-13.0 Safety Symbols To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the following safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings of the symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu equipment. In addition, there may be other labels attached to products that are not shown in the diagrams

Setting outside performance guarantee range: This message is displayed if a value is set outside the performance guarantee range. Level uncal: A value is set outside the output level accuracy guarantee range. > Even if this message is displayed, the output level is usually accurate provided that the message "RF Amplifier Abnormal" is not displayed. FM uncal: FM deviation is set outside the setting range. > The setting range of the FM deviation depends on the carrier frequency. If the FM deviatio

.2: Set a chip rate of x 1.5 or x 2 at AWGN internal addition Ordering Information Please specify the model/order number, name, and quantity when ordering. Model/Order No. Name MG3681A .1 Main frame Digital Modulation Signal Generator (250 kHz to 3000 MHz) MU368060A W1955AE MU368060A-90 MU368060A-91 Expansion unit AWGN Unit Standard accessory MU368060A operation manual: 1 copy Maintenance service Extended three year warranty service Extended five year warranty service Model/Order No. Name MU3680

With features that include a broadband vector modulation bandwidth and large-capacity ARB memory, it supports digital modulation signals for a variety of communication systems. The MG3700A provides optimal performance for generating signals for new wireless communications in advancing broadband technology, as well as for major mobile telecommunication systems such as mobile phones and wireless LANs. Since the standard MG3700A comes equipped with an ARB generator, modulation signals can be output