1.2 Connection • Connect the front panel to the main board. Instructions • Connect the main board to a FATAR TP10 (or TP23) keyboard. • Connect the main board to pedal (see Table 1-1 for pinout). • Connect the main board audio outputs to line level inputs of a mixer, a stereo sound system, etc. • Connect the main board to 12V/1A DC power supply (- to tip, + to ring). Table 1-1. Pedal Inputs (J15) Pinout Pin No. Function Description 1 Pedal Ground Reference Ground for pedal inputs 2 Forte (Sustai

3 mm Benefits • Biasing Control Extends Battery Time • Simple Input and Output Matching • Only One Single Supply Required • No High-side Switching Transistor Required 1. Description 1.1 Process This 5-GHz power amplifier (PA) is designed using Atmel’s Silicon-Germanium (SiGe) process and provides high efficiency. 1.2 Circuitry The PA, ATR7040, consists of a three-stage amplifier with a typical output power of 25 dBm. The output stage was implemented using an open-collector structure. Power up, p

USB MICROCONTROLLERS 8-bit Microcontrollers with Integrated USB Controller Ready to Go in No Time . .. USB MICROCONTROLLERS 8-bit Microcontrollers with Integrated USB Controller Ready to Go in No Time Atmel®’s family of 8-bit microcontrollers supports a wide range of USB applications: high-end keyboards, mice, phone accessories, toys, serial adapters and industrial equipment. An on-chip bootloader permits very quick firmware download from a PC, without using a parallel programmer or dedicated ha

1-1 Section 2 Functional Description .......................................................................... 1-3 2.1 Features....................................................................................................1-4 2.2 Description of the Environment.................................................................1-5 Section 3 Communication Protocol....................................................................... 1-8 3.1 Communication Protocol...............................

1-1 Section 2 Getting Started...................................................................................... 2-3 2.1 Features....................................................................................................2-3 2.1.1 System................................................................................................2-3 2.1.2 Audio Player .......................................................................................2-3 2.1.3 USB Device .........................

1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL (81) 3-3523-3551 FAX (81) 3-3523-7581 Product Contact 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 USA TEL 1(719) 576-3300 FAX 1(719) 540-1759 Literature Requests Web Site © Atmel Corporation 2003. All rights reserved. Atmel® and combinations thereof are registered trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be the trademarks of others. REV 2038B-08/03/7K Atmel’s AT88RF020 low-cost

/ / & m Si*« Key Features • A Family of Devices with User Memories from 1 Kbit to 64 Kbits: 1K, 2K, 4K, 8K, 16K, 32K, 64K Bits • Symmetrical Dynamic Mutual Authentication with 64-bit Cryptographic Keys • Encrypted Passwords with Attempts Counters • Stream Encryption Ensures Data Privacy • Antitearing Recovers Data in Case of Power Loss • Contactless 13.56-MHz Interface, Compliant with ISO/IEC 14443 Type B • Integrated 82 pF Tuning Capacitor • High Reliability Memory, 100K Write Cycl

Read and Write access requirements for each user zone are programmed by the customer during card personalization. The device’s secret keys for mutual authentication and encryption are defined using a customer selected algorithm. Only a computer knowing both the CryptoRF and customer algorithms can provide the required authentication codes. Product Features • Contactless 13.56 MHz RF Communications Interface - ISO/IEC 14443-2: 2001 Type B Compliant - ISO/IEC 14443-3: 2001 Type B Compliant Ant

The AT89C5132 includes 64K Bytes of Flash memory and allows In-System Programming through an embedded 4K Bytes of Boot Flash Memory. The AT89C5132 include 2304 Bytes of RAM memory. The AT89C5132 provides all the necessary features for man-machine interface including, timers, keyboard port, serial or parallel interface (USB, SPI, IDE), ADC input, I2S output, and all external memory interface (NAND or NOR Flash, SmartMedia, MultiMedia, DataFlash cards). •Flash Recorder/Writer •PDA, Camera, Mobile

1 1.2 Abbreviations............................................................................................... 2 Section 2 Overview ..................................................................................................3 2.1 User Interface.............................................................................................. 4 2.2 Quickstart .................................................................................................... 6 2.2.1 Power ON/OFF ............