For connecting, fix it with FG terminal on rear side properly. 8 CITIZEN CBM-290/291 User’s Manual 3.3 Opening/closing front cover (1) Applying your finger on the projection on the left side of the front panel, pull it forward when the lock is released. It opens by about 180 ° centering around the fixed axis. (2) For closing, pressing the front panel, tightly close it until click sound is heard. Also, confirm, on closing, that paper is free of slack. 9 CITIZEN CBM-290/291 User’s Manual 3.4 Paper
7-2. Clearing the Input Buffer In case it is desired to delete the data in the input buffer, the power switch should be turned on while pressing the SEL switch. When deletion of the buffer is completed the buzzer will sound. Please be sure to continue pressing the SEL switch until that time. If the printer fails to work properly at the time the power switch is turned on, please delete the input buffer as described above before inputting new data. CITIZEN 18/48 iDP-3540/41 User’s Manual 8. Parall
4 User Safety Instructions ................................................................................................................. 5 Introduction ...................................................................................................................................... 6 About This Printer Manual .............................................................................................................. 6 What to do if you have problems.....................................
OUTLINE...................................................................................................9 1.1 OPERATION MODE.........................................................................................................9 1.2 CHARACTER SET.............................................................................................................9 1.3 CONTROL COMMANDS.....................................................................................................9 1.3.1 Control Co
. . . . Citizen Systems is reinventing itself. “Leading Technology for Humanity” — Our corporate slogan expresses the aspirations of every Citizen Systems employee, each of whom is striving to realize a shared ideal. We have superior miniaturization and refinement technologies cultivated by members of the Citizen Group. We have a desire to design products that are easy for anyone to use. And we have the skills required to pursue quality at every turn, combined with an unswerving commitment to ma
or other equivalent Core : O12 mm (inner diameter), O18 mm (outer diameter) [Caution] Do not paste the paper to the core. 2.3.2 Printing Position 2.3.3 Head and Cutter Positional Relations CITIZEN 9 CBM-230/231 User’s Manual 3 APPEARANCE AND COMPONENT PARTS CITIZEN 10 CBM-230/231 User’s Manual 4 OPERATION 4.1 Connecting the Interface Cable 1. Turn off the power. 2. Confirm the vertical direction of a cable terminal and connect it to the interface connector. 3. Fix the cable terminal. Serial inte
In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This declaration is applied only for 230V model. CITIZEN CBM-230/231 User’s Manual IMPORTANT SAFETY INSTRUCTIONS • Read all of these instructions and save them for future reference. • Follow all warnings and instructions marked on the product. • Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cl
4.9 Hexadecimal dumping function Using this function, it is possible to check the contents of data sent from the host unit by convening the data to hexadecimal code. The data transmission with the host unit can be monitored by monitoring the transmission conditions. The following procedure should be used to operate this function: 1. Set the printing paper in the printer. 2. Switch off the power switch. 3. With the printer cover left open, switch the power switch to ON while pressing down the LF
To protect the service life of the thermal head, use the following printing rate as a guideline; use the fixed split (6-split) method. 1. Continuous print of high-energy print only : 6 % or less 2. Mixed continuous print of low-energy and high-energy print : 30 % or less of the standard printing rate of 12.5 % 3. Printing rate per dot line : 50 % or less (3) Minimum dots for high-energy print When high-energy print is used, the recommended minimum area is 3 dots (length) . 3 dots (width) or more
For LED ERROR , there is a resister of 330 Ohm on the circuit side to make current value 10 mA. Please use LED which its voltage is approx. 2V. LED over 10 mA may break a control board. 2. Make sure to supply power to all pins of power supply for circuit and power supply for operation to keep required current capacity. 3. Serial interface equips a driver and receiver of RS-232C, make sure to use it at RS-232C level. 4. RESET terminal is pulled up by 3.3K Ohm. Make sue to make this terminal NC, w