It is important to instruct all potential users of its proper operation. It is advised to adjust the volume control to its minimum level (Lo) while not in use and alert other users that hearing damage can potentially result from misuse. WARNING: To avoid the possibility of electrical shock, do not use this product near water (For example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool) while in the bathtub or shower or when you are wet. If the p

New (un-reviewed) call information shows NEW in the display. With each new call it will automatically turn on the “New Calls / Message Waiting Indicator”, which is a small red light located on the lower right-side of the phone’s visual ringer (next to the envelope icon). NOTE: You must follow the instructions in “Set Area Code / LDS (Long Distance Service) Code” for your phone to properly recognize and dial calls out of the Caller ID stored calls (see page #27). You must program your area code s

LAST NUMBER REDIAL To redial the last telephone number you dialed, press the LNR key or dial 19. NOTES: 1. If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK or MONITOR before you begin dialing. 2. Redial does not apply to intercom calls. MANUAL RETRY WITH LNR While you are on an outside call listening to a busy signal and you want to redial the same number dialed. • Press the LNR key. This will hang up your existing call and manually redial the same numb

Check the battery icon on the LCD to see the battery charge level. When replacing the batteries, always use good quality Ni-MH AAA re-chargeable batteries. Charging the Handset 1. Place the handset into the base. The LCD screen will light up and you will hear a beep to indicate charging has begun. 2. Important: Before initial operation, you should fully charge the handset for at least 15 hours. 3. After the batteries are fully charged, begin the registration process as described on page 9. When

4. The LCD shows the current Remote code. Enter the new code you would like to set up and then press the OK soft key. Remote Access You can access many features of your answering machine remotely from any touch tone phone. A four-digit security Remote code is required to access the system and the factory default code is 0000. To enter remote access: 1. Dial your phone number from any touch tone phone. 2. When the Announce1/Announce2 message starts to play, you may enter the remote access mode by

The ClearSounds A50 has been designed specifically to meet your needs, blending an ar - ray of valuable features with simplicity and style. The ClearSounds A50 is truly the Most Remarkable Amplified Phone In The World! This User’s Guide provides you with information to set-up and start using your ClearSounds A50. Please read these instructions thoroughly before using your telephone. Keep this manual for future reference. Please save your sales receipt as proof of purchase in the event you need w

This manual is designed to familiarize you with the A50E Expandable Handset setup, registration and basic functions. For detailed operational instructions, please refer to the ClearSounds A50 User Manual. Keep this manual for future reference. Please save your sales receipt as proof of purchase in the event you need warranty service. Please visit our web site at to: ■ Register your product It’s easy! Click on the Warranty Registration Tab, Complete the form and click “submit”. It’s that simp

Purchase accessories for Your Clearsounds Phone: Optional Neckloop: CS-CLA7V2 (connects easily to your phone’s 2.5mm Phone Headset jack for hands-free conversations). Requires hearing aid(s) or cochlear implant(s) with t-coil(s). Optional Headset: CS-900HS (connects easily to your phone’s 2.5mm Phone Headset jack for hands-free conversations). To learn more, call ClearSounds at 1-800-965-9043 or visit 67 – ENGLISH FCC WANTS YOU TO KNOW 1. This equipment complies with Part 68 of the FCC rules and