Log:

GE 000 gpd

Scaricare : 0 File Size : 242 kb    Produttore : GE  
Categoria : Depuratori d

Please read completely before operating your machine. 1.1 Definitions The operating definitions provided below will help you further understand your machine and this manual. 1.1.1 Permeate Rate (Product Water Rate) [Qp] The Permeate Rate is the flow rate of purified water that passed through the membrane element and out of the membrane element in liter/min (Lpm), cubic meters/hour (m3/h), gallons/min (gpm) or gallons/hour (gph). Specified permeate rates are based on a feed water temperature of 2

GE 000 gpd to 288

Scaricare : 0 File Size : 242 kb    Produttore : GE  
Categoria : Depuratori d

Examples include: remote ON/OFF, posttreatment lockout, etc. WARNING: DO NOT CONFIGURE PRETREATMENT DEVICES FOR PURGE-ACTIVATED SHUTDOWN. THE PURGE CYCLE REQUIRES THE FEED WATER SUPPLIED BY THESE DEVICES. To establish the control loop for purge-activated shutdown, perform the following steps: WARNING: BEFORE OBTAINING ACCESS TO TERMINALS, ALL SUPPLY CIRCUITS MUST BE DISCONNECTED. STEPS 1. Establish that the remote device(s) has dry contacts available to provide the shutdown signal to the RO. 2.

GE 00000737

Scaricare : 0 File Size : 3 mb    Produttore : GE  
Categoria : Telefoni con filo

• Slip the mounting holes over the wall plate posts and firmly slide the unit down into place (wall plate not included). SETTING UP THE CALLER ID MENU You should not plug the telephone into the modular jack while setting up the Caller ID menu. 1. Press the MENU button to enter the menu feature configuration mode. # 1. >ENG FRA ESP (CID language default English) # 2. CONTRAST (default level is 3). # 3. LOCAL AREA CODE # 4. TONE/PULSE (Default is tone dialing). 2. Press the MENU button to scroll t

GE 00000740

Scaricare : 0 File Size : 794 kb    Produttore : GE  
Categoria : Telefoni con filo

Please read the instructions before replacing the batteries and have the batteries ready to be inserted beforehand. IMPORTANT: If you are not going to use the telephone for more than 30 days, remove the batteries because they may leak and damage the unit. 1. Press down and out on the snap tab located on the top of the mounting bracket. Lift the bracket off. 2. Release latch on battery compartment and remove cover. 3. Insert 4 AA-size alkaline batteries as shown on the diagram in the battery comp

GE 00002010

Scaricare : 0 File Size : 385 kb    Produttore : GE  
Categoria : Telefoni con filo

ERASING A STORED NUMBER 1. Press the STORE button. 2. Press the memory location (A, B, C, 1 - 9) to be erased. 3. Press the DELETE button. COPYING CALLER ID MEMORIES TO USER MEMORY 1. Press the REVIEW ^ or V buttons to view the caller number and name you want to copy. 2. Press the STORE button. 3. Press 1-9, A, B, or C for the memory location. The memory location flashes in the display if there is a record occupying that memory location. NOTE: You may select a different memory location by pressi

GE 00002436

Scaricare : 1 File Size : 794 kb    Produttore : GE  
Categoria : Telefoni con filo

1. Press the HOLD button to put the first call on hold. 2. Press the line button next to the flashing red indicator. 3. If the speakerphone indicator is off and you are using the speakerphone, press the SPEAKER button. NOTE: You must always put the first call on hold before answering a second call or you will hang up on the first call. If you want to disconnect from the first call, don't press the HOLD button (skip step 1) and press the flashing line button. ADJUSTING THE HANDSET AND SPEAKERPHON

GE 00003287

Scaricare : 0 File Size : 2 mb    Produttore : GE  
Categoria : Risposte automatiche

THE LIGHTNINGFLASH AND ARROWHEAD WITHIN THETRIANGLE IS AWARNING SIGNALERTING YOU OF“DANGEROUSVOLTAGE” INSIDETHE PRODUCT. CAUTION: TO REDUCE THERISK OF ELECTRIC SHOCK, DONOT REMOVE COVER (ORBACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TOQUALIFIED SERVICEPERSONNEL. THE EXCLAMATIONPOINT WITHIN THETRIANGLE IS AWARNING SIGNALERTING YOU OFIMPORTANTINSTRUCTIONSACCOMPANYINGTHE PRODUCT. CAUTION: Introduction Your Digital Answering System is designed to give you flexibility in use and high qual

GE 00005381

Scaricare : 4 File Size : 999 kb    Produttore : GE  
Categoria : Telefoni con filo

NOTE: The flashing cursor automatically moves to the next position or you may press the 7 or 8 buttons to move the cursor to the next position. Press the 5 key 3 times for the second letter L. Press the 1 key once to insert a space, and press the 7 key 4 times for the letter S. Press the 6 key once for the letter M. Press the 4 key 3 times for the letter I. Press the 8 key for the letter T. Press the 4 key twice for the letter H. 6. Press the STORE button to save the name. 7. To enter another na

GE 00009246

Scaricare : 1 File Size : 1 mb    Produttore : GE  
Categoria : Telefoni con filo

approved Nickel-Cadmium battery model 5-2459, which is compatible with this unit. 1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset. 2. Locate the battery compartment on the back of the handset. 3. Plug the battery pack cord into the jack inside the compartment. NOTE: To ensure proper battery installation, the connector is keyed and can be inserted only one way. 4. Insert the battery pack. 5. Close the battery compartment

GE 0000946

Scaricare : 1 File Size : 1 mb    Produttore : GE  
Categoria : Telefoni con filo

Then press the MEMORY/conference button on the handset to retrieve the external caller. Three-way conversation begins, and CONFERENCE shows in the display. 3. If the originating unit is the base, press the intercom button to setup the intercom. Then press the base MEM/CONFERENCE button on the base to retrieve the external call. Three-way conversation begins, and CONFERENCE shows in the display. NOTE: A handset or the base may enter a conversation directly by pressing the TALK/call back button





categorie