Cut, ream, thread - the Model 1210 has all the tools you expect on a larger machine and a powerful V2 HP universal motor to get the job done. And its reformulated coolant dramatically advances die life for maximum uptime. Thread where you need to thread! Save time, money, and improve your service productivity with the RIDGID Model 1210 Oil-less Threading Machine. RIDGID Capacity Pipe: 1/2", 3/4", 1" Technical Specifications Motor: 1/2 HP, 115V Universal 50-60 Hz Motor Control: Heavy-Duty To

51 1822-I WARNING! Read this Operator’s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or serious personal injury. OPERATOR’S MANUAL • Francais – 25 • Castellano – pag. 51 1822-I WARNING! Read this Operator’s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or serious personal injury. Pipe and BoltThreading M

• Gasoline, solvents, gun powder or other munitions, dynamite, propane, acetylene or other such products can explode if stored inside these products. • Use these products ONLY for storing and transporting electric or hand tools and equipment, and other similar materials. • Failure to follow these warnings or modifications or other uses of these products could result in death, serious injury or property damage. WARNING For Models 2048-OS and 204830-OS: To prevent electric shock, explosion, fire a

–ATTENTION– Read and understand all instructions and warnings before operating or using this product. –NOTICE– Any modification or unintended use of this product shall immediately void all manufacturers warranties. Manufacturer disclaims all liability for injuries to persons or property resulting from any modification to, or unintended use of this product. PADLOCK INSTALLATION INSTRUCTIONS FOR ALL UNITS U-Bolt 7/8"-1" Figure 3 (measure height when lock is closed) Lock Shackle Figure 1 Figure 2 T

Securing shelf for transport: 1. To minimize movement during transport, make sure the shelf front is located behind the stop tabs on each side of the box. 2. Once the box is on-site the shelf can be moved forward by slightly lifting the front edges over the stop tabs. The shelf bottom should always lie flat on the runners when finished adjusting the shelf. "RapidPassThru"-1.eps STOP TAB HAND TOOL STORAGE SCREWDRIVER Figure 8 TO INSTALL RAPID PASS™ GROMMET (Model 2048-OS and Model 204830-OS) TOOL

41 WARNING! Read this Operator’s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or serious personal injury. 300 Compact OPERATOR’S MANUAL • Francais – 19 • Castellano – pag. 41 WARNING! Read this Operator’s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or serious personal injury. 300 Compact Pipe and BoltT

Terra. Cotta Ave., Crystal Lake, Illinois to the original retail purchaser of RIDGID® Storage Products. RIDGID STORAGE EQUIPMENT WARRANTS THAT RIDGID ON-SITE STORAGE EQUIPMENT WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF THREE (3) YEARS FROM DATE OF PURCHASE BY THE ORIGINAL RETAIL PURCHASER. THIS WARRANTY IS SPECIFIC TO THIS STORAGE EQUIPMENT. WARRANTIES FOR OTHER RIDGID PRODUCTS MAY VARY. If, before the expiration of the Warranty period, purchaser discovers that this RI

Failure to understand and follow the contents of this manual may result in electri- cal shock, fire and/or serious personal injury. 5228 Double Insulated Variable Speed, Dual Action Reciprocating Saw Table of Contents General Safety Information Work Area Safety ........................................................................................................................................................2 Electrical Safety...................................................................